Troubleshooting a Hot Water System Emergency: How to Do If It Stops Working
Troubleshooting a Hot Water System Emergency: How to Do If It Stops Working
Blog Article
Were you trying to find additional info on Hot Water Heater Repair?
Many modern residences make use of an electrical water heater for their heating unit, due to its convenience and also convenience of use. Nevertheless, just like any other electrical appliances, troubles may arise with its use, suddenly. It can be truly frustrating to awaken to a cool shower instead of a hot one or having your bathroom with water that isn't warm sufficient or perhaps also hot. Whatever the case might be, water heater issues can be rather stressful. Fortunately, we have actually made a listing of possible remedies to your hot water heater issues. There are a number of factors that can cause many of these troubles, it could be a concern with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, ensure you turn off the main power supply for safety and security. Whatever the problem is, getting it dealt with must not pose way too much of an issue if you adhere to these actions:
Check Your Power Supply:
As standard as this may appear, it is very essential. Without sufficient power, your hot water heater will not work. So the first thing to do when your water unexpectedly retires is to verify that it isn't a power trouble. Inspect if the fuse is burnt out or the circuit breaker tripped. If the breaker is the issue, merely turn it on and off again. Replace any kind of broken or damaged fuse. Examine the home appliance with power after these adjustments to see if it's now functioning.
Check the Heating Element in the Hot Water Heater:
If it's not a power problem, then try taking a look at your heating element if it is still working. Check each of your burner to be sure the trouble isn't with any of them. If any of them is defective, replace that part and then inspect whether the hot water is back on.
Inspect Your Thermostat:
If your water heater still isn't functioning or the water coming out isn't hot enough, you may require to examine the temperature settings on your upper thermostat. Make certain the breaker is switched off before doing anything. Open up the accessibility panel and also press the red button for temperature level reset over the thermostat. This need to assist heat up the water. Turn the circuit breaker back on as well as check if the trouble has been fixed.
Call An Expert:
If after replacing all damaged components and also resetting your temperature, the hot water heater still isn't working, you may need to get in touch with a professional plumber for a specialist point of view. The problem with your heating system could be that the hot and cold faucets have actually been switched or it might be undersized for the amount of warm water needed in your home. Whatever the case may be, a professional plumber would assist fix the trouble.
Verdict
Hot water heater troubles are not constantly significant. A lot of them are because of small issues like a blown fuse or worn-out burner. Replacing the malfunctioning parts must do the trick. However, if you are still not able to resolve the trouble, give a call to your local plumber ahead to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I hope you enjoyed our section on How to Troubleshoot and Repair an Electric Water Heater. Thanks a ton for taking time to read our article. So long as you liked our blog entry plz don't forget to share it. Thanks for your time spent reading it.
Immediate repair? Phone now! Report this page